• deutsche Flagge
  • english flag
  • france flag
  • dansk flag (inactive)
  • netherlands flag (inactive)

Wireless components


Below you will find further informations on the wireless components for WiPro and C.A.S.:

Wireless contacts



Wireless contact black Art.Nr.: THA-2-00008
Wireless contact white Art.Nr.: THA-2-00029

The contacts are battery-driven and report opening/closing wireless to the main units from C.A.S. and WiPro.

The contacts stick to the surfaces, so you don't have to drill any holes in the vehicle. Special automotive self-adhesive pads stick on many kinds of surfaces. For (acrylic) glass there are self-adhesive warning labels included.

Inside the radio magnetic contacts, proven reed contact technology is coupled with the latest 433 MHz wireless technology:
Removing the magnet in the smaller enclosure far enough from the transmitter unit, starts the reed contact sending a signal. The main unit is aware of any state of all wireless contacts.

Developing the wireless contacts, thought has been given to the usually bigger distances on window frames. At least 22mm are possible.

All wireless components are secured via unique serial numbers and 4 billion changing codes. Once programmed to the main unit, only paired devices function.
Even on a voltage drop the data is stored. Deletion and reprogramming in the main unit is stil possible.
Further another reed contact protects from outer magnetic influences.

The single, cheap button cell energizes the contact for several years. Depending on the guarantee of the battery, they should be changed every two years.
A weak battery is indicated via the LED on the wireless component and via an accoustic signal from the main unit.

Bridging bigger gaps
Adhesive bonding of contact/magnet

 



Power supply: 1x CR2032
Range: appx. 50m
Frequency: 433,92 MHz (<10mW)
Dimensions(contact): 44x34x15mm
Weight: appx. 33g
Colors: black (Art.Nr.: THA-2-00008)
  white (Art.Nr.: THA-2-00029)

Remote control



The remote control activates/deactivates the main unit.

For bigger comfort both buttons do the same - the consequentially action will be transmitted. When you push the two buttons at the same time a panic alarm is activated.

For motorhomes with only one original remote control it is an inexpensive alternative.

The remote control is protected via unique serial numbers and rolling codes, too.

Power supply: 1x CR2032
Range: appx. 50m
Frequency: 433,92 MHz (<10mW)
Weight: appx. 20g
Colors: black (Art.Nr.: THA-2-00009)

Wireless gas alarm



The wireless gas alarm is the perfect match to the WiPro main unit. It detects smallest amounts of propane and butane, just as well as narcotic gases.

Naturally the wireless gas alarm needs a constant power supply, but uses the radio path to alert the main unit.

In the same housing as the GBA-I the wireless gas alarm admits easy mounting via the included drilling template on the correct height.

Via the on-/off-button it can be deactivated on disuse.

Current consumption: appx. 70mA
Sensitivity: 50ppm
Range: appx. 25m
Frequency: 433,92 MHz (<10mW)
Dimensions: 37x111x27mm
Colors: black(Art.Nr.: THA-2-00015)
Power supply: 12/24 VDC

Radio cable loop



The radio cable loop was designec for protection of mobile belongings, like bicycles, surf boards, camping furniture,...

The cable is guided through the arm rest or bike frame, then the sending unit through the loop at the end of the cable. Now the sending unit is clipped in the wall holder.

A magnet in the wall holder enables the same functionality as the wireless contact. When the main unit is activated, the sending unit alerts the extraction, cutting or tearing as well as external magnetic fields.

Hence you will be informed on the attempt of burglary.

Power supply: 1x CR2032
Range: appx. 50m
Frequency: 433,92 MHz (<10mW)
Dimensions: 49x47x16 mm
Weight: appx. 77g
Colors: white (Art.Nr.: THA-2-00012)